Sanphuang, Varittha, and Niru K. Nahar. "Flexible terahertz and FarIR polymer‐supported filter." Microwave and Optical Technology Letters 60, no. 11 (2018): 2801-2805.
Abstract
We present the design, fabrication, and measurement of a terahertz (THz) polymer‐supported filter. A periodic structure, frequency selective surfaces (FSS) is employed to provide bandpass characteristic for this filter design with polyimide (PI) film as a substrate. This PI film (13 μm thick) is very thin and thus provides a flexible support to the filter. The average extracted dielectric constant ε r is 3.35 and the average refractive index n s is 1.84. The final filter structure was fabricated using standard microfabrication process. The measured transmission response shows high percentage of transmission (~80%) with the peak at 0.58 THz and sharp roll‐off that covers the broad range of frequency from 0.1 to 1 THz (wavelength of 300 μm‐3000 μm).
For full paper see https://onlinelibrary.wiley.com/doi/abs/10.1002/mop.31414
… The transmission responses of these PI films were measured
using a time domain THz spectroscopy (TPS3000, TeraView Ltd.) as shown in Figure 2. The transmission responses show high percentage of transmission
starting …
No comments:
Post a Comment