Friday, 24 November 2017

Nondestructive Imaging of Packaged Microelectronics using Pulsed Terahertz Technology


Abstract



This work presents the use of terahertz reflection imaging for nondestructive evaluation of packaged microelectronics. Power MOSFETs and SRAM devices are placed in a pulsed terahertz imaging system in the reflection mode with an incident angle of 30°. From the received signal at each point on the sample under test, the internal structure of the device can be clearly seen. For transistors, terahertz nondestructive imaging has been successful in determining die size and location as well as the bond wire size, number, and connections. High-pass frequency filters are utilized to enhance the image quality for viewing the bond wires. In addition, the terahertz B-scans are used to determine additional information including the vertical position of the bond wires and the die inside the packaged device. For the SRAM, the terahertz nondestructive imaging shows similar effectiveness in defining the layout of the metal connections inside the package and the wire positions. Thus terahertz imaging is shown to have a strong potential for nondestructive evaluation of these devices.


... This work makes use of the TPS Spectra 3000 (Teraview, Ltd., UK) pulsed terahertz imaging and spectroscopy system at the University of Arkansas. The system diagram is shown in Fig. 1a. ...



For more information about TeraView visit https://www.azom.com/suppliers.aspx?SupplierID=12145


for full paper see
http://www.imapsource.org/doi/abs/10.4071/isom-2017-THP23_160?code=imap-site